Ooni Koda - FAQ
How do I setup Ooni Koda?
All Ooni pizza ovens are portable and do not require any installation. You simply need to open the oven legs, connect the gas cylinder to the oven and you will be ready to cook in minutes!
What kind of fuel/gas tank do I need?
All Ooni gas fired ovens utilize standard LPG cooking gas. Any size cylinder can be used with Ooni ovens, using a standard LPG hose and regulator (included with all gas ovens and gas burners). Ooni ovens are not compatible with piped gas or CNG.
The LPG cylinder regulator must be rated for 30mbar / 300mmWC pressure. This is a standard pressure for LPG cylinders across India. Regulators rated for higher pressures will damage your oven.
What is a regulator and which one do I need?
A regulator is clamped on top of the LPG cylinder and is connected to the gas fired oven using an LPG hose.
LPG cylinders from HP Gas, Bharat Gas and Indane use the same regulator (included with all gas ovens and gas burners).
Where can I get an LPG cylinder from?
LPG cylinder booking can be done online on the below portals. A local distributor search is available as well. 5kg cylinders are easily available for purchase by showing your Aadhar card. A 5kg cylinder will be able to run your oven for 8-15 hours (depending on your oven size) and can be refilled as desired.
How do I connect my LPG cylinder to my gas-fired oven?
You simply need to fit the included LPG hose over the gas inlet of your oven and secure it with the included hose clamp as shown below.
Tip: Soak the ends of the hose in hot water for 2 minutes. This will soften the rubber and make it slightly easier to slide onto the inlet of the oven and gas regulator. Please note that the hose and inlet will require a little force to slide on as they are supposed to be a snug fit by design.
Figure 1. Gas inlet
Figure 2. LPG hose secured with hose clamp
Figure 3. Gas regulator connected to LPG cylinder
How do I light my Ooni gas fired pizza oven?
Once you have connected the LPG regulator and hose, open the valve on your gas cylinder.
Push in and slowly turn the temperature control knob of your oven counterclockwise until you hear a click and the burner ignites.
If the burner does not ignite, wait 5 minutes for any gas to dissipate and then repeat the step above. It is important to turn the knob slowly. It is normal for it to take a few attempts for the burner to ignite.
Continue to push in the temperature control knob for 30 seconds after ignition and then release.
Contact Us
If you have a question which has not been answered, please feel free to get in touch with us.
